Inspection work before using the film punching machine

Products like film punching machines have played a lot of roles in the industry. Some users operate the film punching machine directly without checking. If they do not check, it is easy to operate in the actual process. If there is a problem, in order to avoid such a problem, we need to check whether there is any problem with the product before using it. Let's take a look at the inspection work before using the film punching machine.

Before using the film punching machine, it is necessary to check whether there are other things on the punch part, especially the knife edge and the lower die. After the inspection, add an appropriate amount of lubricating oil to the punch (that is, the contact part between the punch and the guide sleeve), and pay attention to wipe the oil on the knife edge with a cloth to prevent residue from adhering to the knife edge. Recommended lubricants: sewing machine oil, pure motor oil or butter. When the punching machine continues to work, lubricating oil should be added or changed at least once an hour to keep the punch and guide bush lubricated. When using, clean up the residue on the punching machine in time, especially the residue of the lower mold, and then turn it on after cleaning. When using, pay attention to whether the punching machine is loose or has abnormal sound. If any abnormality is found, stop the machine in time to deal with it. When the position of the punching machine is found to be offset, it cannot be beaten with a machine or a forceful hammer. Recommended air pressure: 5-7kg/cm2. After use, first clean the surface of the punch, especially the part below the die of the punch. Add lubricating oil to the punch and the lower die, and press the punch to a low position so that the knife edge and the lower die are not damaged.
I hope that when you use the film punching machine in the future, you will pay more attention to the problems we have introduced. After checking these, you can ensure that there is no problem with the film punching machine. If there is a problem, you can deal with it in time. Our main products are precision needle rollers, heated punching needle rollers, needle rollers, film punching machines, needle plates and so on. The reliability and stability of product quality and manufacturing process are at the advanced level in the domestic industry.